Typical Causes of Water Damage in a Bathroom

Make An Appointment

Just about every person may have their own unique theory when it comes to Preventing Water Damage in the Bathroom.


Looking for Signs of Water Damage in the Bathroom
The washroom is very vulnerable for wet build-up and prospective water damage as a result of the regular use water in it. This post provides easy examination methods to help identifying water damage hazards.
The constant use of water in the washroom makes it incredibly at risk for moist buildup and prospective water damage. By checking it consistently, you can reduce water associated problems.
The following set of examinations is easy to do and also should be done when in every 3 months in order to keep your shower room healthy as well as to stop potential water damages brought on by the bath tub, the shower, pipe joints as well as plumbing, sinks, closets, and the bathroom
Do not disregard performing these evaluations and also be thorough while performing them. Bear in mind that these straightforward inspections can save you a great deal of cash by providing early indicators for water damages

Bath tub and Shower


The shower as well as tub call for unique attention and maintenance. Check the ceramic tiles as well as change if fractured. Make sure that there is no missing grout in between the floor tiles. Evaluate and replace broken caulking at joints where the walls satisfy the flooring or the bath tub. Obstructed drains pipes and also pipes problems will avoid the tub from drying as well as might suggest significant troubles under the bath tub. Consult with a specialist quickly to prevent structural damages. Pay attention to discolorations or soft areas around the bathtub walls as they might show an inner leakage.

Plumbing


Signs for water damages are tough to identify given that the majority of pipelines are mounted inside the wall surfaces.
Pay unique interest to flooring and also wall surfaces wetness and stains as they might suggest an unnoticeable plumbing problem. Examine dampness levels in adjoining spaces as well.

Sinks and Cabinets


Sinks and closets are revealed to wetness as well as humidity daily and also are usually ignored. Check frequently under the sink and also on the counter top above it. Fix any type of drip in the trap as it might suggest drainpipe issues. Take a look around the sink, slow-moving draining pipes might suggest a blocked drainpipe. Replace sink seals if they are fractured or loose.

The Toilet


The toilet is a susceptible water junction. Examine the water lines and look for leaks around the commode seat, in the pipe, and under the water container. If you spot any kind of indications of moisture on the flooring around the toilet, look for leaks in the toilet edge and storage tank seals.
Be aware that hanging commode dish deodorants boosts the chances for blockages.

How to prevent bathroom water damage


Water damage is unique in that it builds up over an extended period of time, eventually leading to outbreaks of mould, softening of walls and ceilings, cracks in sealant and tiles, and distortion of base floors and frames.



Bathroom water damage is incredibly common, as we often don’t realise it’s happening until something major happens to attract out attention, such as a bulge appearing in the ceiling or the sealant connecting your bath to the floor becoming cracked.



We spread a lot of excess water around in our bathrooms, which seeps into tiny pores and cracks in all sorts of surfaces where conditions make drying difficult. Besides actual surface water, the steam which billows from our hot showers and freshly-run baths takes its toll as well over time.



Any leaking fixtures, such as taps, showerheads, or toilets, allow water to seep into cracks on floors, walls, and tiles – where mould can begin to bloom and rot sets in.



If you are a concerned homeowner looking to keep your bathroom in tip-top shape for an upcoming inspection, sale, or simply for your own enjoyment, this article will teach you how to identify and repair risks associated with water damage in your bathroom.


  • 1. Keep your towel close to the shower/bath, and dry yourself off whilst still standing in the shower or bath. If you step out of the bath or shower, have a towel or bathmat on the floor for you to stand on. This stops excess water gathering on the floor and being splashed on walls.


  • 2. Make sure that the extraction fan is switched on. This sucks some of the steam out of your bathroom, preventing condensation build-up on walls, ceilings, and floors. If your fan is faulty or broken, have it replaced as soon as possible.


  • 3. If you think your toilet might be leaking, switch off the shutoff valve when you’re not using it. It can be difficult to spot toilet leaks sometimes, but if you hear a low, steady hiss coming from the tank, excess water is leaving the tank. Though this water is probably just going down the drain, any cracks or fissures in the bowl will cause small, constant leaks that can do significant damage to surrounding surfaces over time.


  • 4. Try and clean your bathroom at least once a week. This includes wiping down surfaces with a cloth and then drying them thoroughly once you’re done. This will prevent mould and rot from setting in and damaging the surfaces in your bathroom.


  • Check that sealant and grout are intact


    Grout and sealant are the materials which fix your bathroom fittings in place, such as shower cubicles, bathtubs, and tiles. Regular prolonged exposure to moisture and heat in the bathroom can cause grout to crack and wear out. Check the grout and sealant regularly to make sure it’s free of stains and rot. Use a cleaning solution to clean the grout when you are doing the housework, and dry it thoroughly when you’re finished.



    If you notice grout is missing or extensively damaged, you should remove any worn-out gout and clean the area thoroughly. Give it a good dry and let it sit for a bit, and then install new grout. This will prevent rot from spreading and stop your fixtures or tiles from shifting.


    Check regularly for leaking pipes or spouts


    If you see water dripping from a pipe or other fitting, you should have it repaired as quickly as you can. You can probably do it yourself by tightening the fittings or applying a plumbing putty or sealant.



    Even small leaks become progressively worse over time, and the water they leak can accumulate underneath the floor or behind walls. If you are unsure about the extent of a leak, you should contact a professional blocked drain plumber for diagnosis and repair.


    Check for leaks around the toilet and bath


    When a bath, shower cubicle, or toilet are installed they are caulked into the floor. It’s important that you check this caulking regularly to make sure that it’s in good condition. If the caulk becomes damaged, the fixtures will leak and moisture will accumulate. Eventually this can cause the fixtures to shift and damage the floor, leading to further water damage.


    Look for any signs of decay or rot


    When you’re using or cleaning your bathroom, keep an eye out for any indication that rot, mould, or other forms of decay might be setting in. If you notice stains on surfaces or sealant, you will need to take action.



    Make sure that there aren’t any loose tiles


    Tiles in shower cubicles are particularly prone to coming loose. Make sure that all the tiles in your bathroom are fitting tightly and are adequately caulked. If you notice loose or shifting tiles, remove them as soon as you get the chance, clean and dry the area, and replace the tiles. You can use the same tiles you removed, just make sure you clean and dry them thoroughly before you replace them.


    Check under the sink


    This is an important one. Make sure that you look under your sink occasionally to make sure that the pipes and fittings there are in good condition. If they aren’t, water can accumulate in this space and spread rot to other surfaces. It can also damage the foundations of the sink fitting and damage the floor.


    Install drain covers


    Drain covers have a very important place in every bathroom. They work by keeping large particles, such as dirt clumps and hair, out of the drains where they could cause blockages. You probably already have drain covers over your drains, so make sure that they are kept clean and clear of debris. This will prevent any blockages from occurring in the drain, which could cause leaks and internal flooding.

    https://blockeddrainplumbers.com/how-to-prevent-bathroom-water-damage


    How to Repair and Prevent Bathroom Water Damage

    As a person who reads on Preventing Water Damage in the Bathroom, I thought sharing that piece of content was a good thing. Make sure you take a moment to promote this blog post if you enjoyed reading it. We cherish reading our article about Preventing Water Damage in the Bathroom.



    Course Detail

    Leave a Reply

    Your email address will not be published. Required fields are marked *